 |  |  |  |  |  |  |
a. All flywheels, shafting, pulleys, belts, gears, sprockets, chains, and fan blades will be guarded/enclosed when located below seven feet above the floor or work platform. b. Guards installed on machinery and equipment, such as air compressors, conveyors, drill presses, etc., will not removed when operating. Guards removed for servicing or other work on the machine or equipment will be immediately replaced upon completion of the work. c. Woodworking equipment, such as power saws, radial arm saws, or table saws, nor portable abrasive grinders, will not be operated unless all required guards are in place. Feather boards and push boards will be used when necessary. Compressed Gas Cylinders a. All gas cylinders shall have their contents clearly marked on the outside of each cylinder. b. Cylinders must be transported, stored, and secured in an upright position. They will never be left laying on the ground or floor, nor used as rollers or supports. c. Cylinder valves must be protected with caps and closed when not in use. d. Oxygen cylinders and fittings will be kept away from oil or grease. Oxygen cylinders will be stored at least 20 feet from any fuel gas cylinder, or separated by a fire barrier at least five feet high. e. When cylinders are hoisted, they will be secured in a cradle, sling-board, or pallet. Valve protection caps will not be used for lifting cylinders from one vertical level to another. |
| H E A L T H A N D S A F E T Y P R O G R A M |
| Guarding |
| Houston KACO, Inc. 7107 Peerless Street Houston, TX 77021 (713) 203-2505 |